The MegaPulse 1.2x50-10kV PV is specifically designed to perform the
Input Test on PV Panels in accordance with IEC 61730-2, Para. 10.5.3.
The output is in accordance with the published waveform from 800-10000V
peak (open circuit).
IEC 61730-2 stipulates that an in-tolerance 1.2x50mSec waveform be delivered to the PV Panel during testing. The MegaPulse 1.2x50-10P PV is provided with output taps corresponding to the capacitance of the PV panel being tested.
Complies with IEC 61730-2 Para. 10.5.3 and IEC 1180 tolerances for a 1.2x50 waveform when testing a PV panel with a capacitance range from 10nF - 100nF. Taps from 100nF - 180nF are provided for reference testing only.
Taps for 0-10nF, 10-15nF, 15-25nF, 25-40nF, 40-60nF, 60-80nF, 10-100nF, 100-122nF, and 122-180nF are provided.
To obtain claimed results, leads must be prepared per the instructions in the Manual.
Outputs a 1.2x50uSec waveform for testing of Photovoltaic Panels, corrected for panel capacitance.
Front panel switch allows waveform reversal.
Sixty second pulse times.
Provides correct waveform for any panel 10 - 100 nF; taps provided for 100-180 nF are for Reference Only.
Can be controlled from computer with Option Testminder.
Outputs up to 10000V peak.
Virtual Impedance of 12 ohms.
Available TestMinder for computer control of long test sequences.
The HT-3500S RF tester is specifically designed for the challenges common to operating in the field. Along with heavy duty internal brackets and a sturdy, shock-absorbing case, this unit includes adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit settings - all controlled from an easy-to-access front panel. Call for pricing.
Perform one of the most difficult tests required with both speed and accuracy. The CDT-240 now offers a 16A option along with designed presets to implement the plug discharge test as described in IEC 61010, 60065 and 60335.
Compliance West USA is announcing the EOL (End-of-LIfe) of our MegaPulse Defib 5P series effective 07/14/2015. This unit has been replaced by our MegaPulse D5-PF advanced tester. Compliance West will continue to support, repair and calibrate the Defib 5P throughout the terms of any existing warranty agreements or up until the product's End-of-Support date. Please contact us with any questions.