Hipot and Ground Continuity Function Tester

  • Hipot and Ground Continuity Function Tester
  • Product Views
  • Hipot and Ground Continuity Function Tester
  • Hipot and Ground Continuity Function Tester

Hipot and Ground Continuity Function Tester

  • $270.00

The HTT-1 was designed to provide a fast, safe and reliable way to verify proper operation of Dielectric Withstand (hipot) and Ground Continuity Testers between calibration cycles. It allows the operator to check the result of the three failure modes encountered in production hipot and ground circuit testing (open ground, high leakage current, and dielectric breakdown) separately or in any combination to verify proper test equipment operation. A passing test can also be simulated. The test leads allows connection of the HTT-1 to any hipot tester using a standard NEMA 15A receptacle and banana jacks to allow direct connection to the hipot/ground bond tester(s) using their cables. The manual contains anticipated results and suggests testing procedures. The maximum voltage the HTT-1 can test is 2000Vac/3000Vdc.

Reviews (0)

Write a Review

Note: HTML is not translated!
    Bad           Good


  • The stock HTT-1 simulates the following failures:
  • Ground Continuity Chassis to Ground (open), and/or
  • High Leakage Line to Ground (short), and/or
  • Dielectric Withstand Failure (Arc View window displays an arc at 750Vac ± 400V).
  • The HTT-1 can also be set to simulate passing tests:
  • Ground Continuity Chassis to Ground (short), and/or
  • Normal Leakage Line to Ground (open), and /or
  • Dielectric Withstand OK (up to 3000 volts)
  • Arc Testing is at 750 ± 400Vac. Results visible through Front Panel Window.
  • Works with any manufacturer's Dielectric Withstand or Ground Continuity Tester. The HTT-1 simulates the failures and your tester should return results consistent with the switch settings on the front panel of the HTT-1
  • The HTT-1 is a passive device. No batteries or power is required.
  • Verifies proper operation of your equipment in less than a minute.
  • Portable.
  • Light weight.
  • Simple to operate.
  • Saves time.
  • For testing of Ground Bond Testers up to 30A..
  • 1 year warranty.


Max Current capability of Ground Test circuit30A
Setting of PASS for Leakage CurrentOpen Circuit
Setting of FAIL for Leakage CurrentShort Circuit
Max Voltage capability of Hipot Test Circuit3000Vac / 4200Vdc
Setting of PASS for Ground CircuitShort Circuit
Setting of FAIL for Ground CircuitOpen Circuit
Setting of Arc Detection CircuitArc-over at 750V +/- 400Vac / 1050V +/- 560Vdc
Operation Temp15 - 40 C
Relative Humidity Range0-90% non-condensing
Dimms5.3"(W) x 6.8"(H) x 2.3"(D)


Download Manual
HTT-1-Manual.pdf Download Manual
HTT/Ground Check Compatibility.pdf Download Manual

Contact Us

Corporate Sales Office (USA)

Compliance West USA
650 Gateway Center Way Suite D
San Diego, CA 92102 USA

US Representatives

Product Update Bulletin

Newest Product: HT-3500S RF, "ruggedized" hipot tester

The HT-3500S RF tester is specifically designed for the challenges common to operating in the field. Along with heavy duty internal brackets and a sturdy, shock-absorbing case, this unit includes adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit settings - all controlled from an easy-to-access front panel. Call for pricing.

Read More

Available: 16A option for CDT-240

Perform one of the most difficult tests required with both speed and accuracy. The CDT-240 now offers a 16A option along with designed presets to implement the plug discharge test as described in IEC 61010, 60065 and 60335.

Read More

MegaPulse Defib 5P reaches EOL - Replaced by D5-PF

Compliance West USA is announcing the EOL (End-of-LIfe) of our MegaPulse Defib 5P series effective 07/14/2015. This unit has been replaced by our MegaPulse D5-PF advanced tester. Compliance West will continue to support, repair and calibrate the Defib 5P throughout the terms of any existing warranty agreements or up until the product's End-of-Support date. Please contact us with any questions.

Read More