Implantable Surge Tester Truncated Exponential Mono- and Biphasic 140-270V

Product Compare (0)

MegaPulse Implantable Test 2:
Implantable Surge Tester Truncated Exponential Mono- and Biphasic 140-270V

Call for Price

The MegaPulse Implantable Test 2 outputs the truncated exponential pulse used to defib-proof test implantable medical devices.  Resistor networks described in the Standard Tests are included internally.  The MegaPulse Implantable Test 2 can recharge and trigger the next pulse in 20 seconds, in accordance with the Standards.  Positive and negative polarity are selected with a front panel switch, or via optional computer control.  The computer control can conduct the test sequence shown in the Standard. 

The tests are described in the following Standards:

  1. EN 45502-1:2015, clause 20.1, Test 1, Figures 1, 2 and 3; 140V peak.
  2. ISO 14117:2012, clause 6.2.2, Test 1; Figures 45 and 46; 270V peak.
  3. ISO14708-1:2014, Part 1; 140V peak.
  4. EN 45502-2-2:2008, clause 20.2; 270V peak.
  5. EN 45502-2-1:2003, 140V peak.
  6. EN 45502-2-2-3:2010, 140V peak.
Please click here to view an Excel file showing which tests are required in the various Standards.

A Compliance West surge Tester. That means it outputs a guaranteed waveform but won't break the bank. The tester outputs the waveform it is supposed to, time after time. Built in the USA. Email and phone support free for life. Reasonable repair and calibration charges. Timely and helpful customer service always.

A rental unit is available.  Please call us for details.

Available Options

Reviews (0)

Write a Review

Note: HTML is not translated!
    Bad           Good


  • Up to 270V test Voltage.
  • Designed with operator safety in mind: Set up the EUT to the right and behind the tester, and a right-handed operator will find himself standing to the left of the tester, allowing maximum separation.
  • Theoretical graphs and actual graphs showing the output of your tester are included with each MegaPulse Implantable Test 2, allowing historical documentation of original machine performance.
  • Microcontroller technologies, front panel voltage meter indicates test peak open circuit voltage and polarity.
  • Reverse polarity waveforms available by pushing a button on the front panel. No need to change the test setup. Positive polarity indication minimizes errors.
  • 1-year calibration cycle.
  • All resistor networks included internally.
  • Test leads included.
  • 1 year warranty


Outputs truncated exponential monophasic and biphasic pulse shown in Test 2 of EN4502-2-2, EN 45502-1, ISO 14117-1 and ISO14708-1.
Outputs truncated exponential monophasic and biphasic pulse shown in Test 2 of EN4502-2-2, EN 45502-1, ISO 14117-1 and ISO14708-1.
Resistor networks described in the Standards are supplied.
Positive and negative polarity control on front panel or optionally via computer control.
Voltage meter accuracy ±3V.
Duty Cycle: 1 pulse every 20 seconds.
I year calibration cycle, 1 year warranty, supplied with NIST Calibration, A2LA Cal available.


Download Manual
MegaPulse Implantable Test 2 rev 1.0.pdf Download Manual

Contact Us

Corporate Sales Office (USA)

Compliance West USA
650 Gateway Center Way Suite D
San Diego, CA 92102 USA

US Representatives

Product Update Bulletin

Newest Product: HT-3500S RF, "ruggedized" hipot tester

The HT-3500S RF tester is specifically designed for the challenges common to operating in the field. Along with heavy duty internal brackets and a sturdy, shock-absorbing case, this unit includes adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit settings - all controlled from an easy-to-access front panel. Call for pricing.

Read More

Available: 16A option for CDT-240

Perform one of the most difficult tests required with both speed and accuracy. The CDT-240 now offers a 16A option along with designed presets to implement the plug discharge test as described in IEC 61010, 60065 and 60335.

Read More

MegaPulse Defib 5P reaches EOL - Replaced by D5-PF

Compliance West USA is announcing the EOL (End-of-LIfe) of our MegaPulse Defib 5P series effective 07/14/2015. This unit has been replaced by our MegaPulse D5-PF advanced tester. Compliance West will continue to support, repair and calibrate the Defib 5P throughout the terms of any existing warranty agreements or up until the product's End-of-Support date. Please contact us with any questions.

Read More