• Surge Tester 1.2x50-7200PF 39 ohm
  • Product Views

MegaPulse 1.2x50-7200PF:
Surge Tester 1.2x50-7200PF 39 ohm

  • $6,860.00

Built with the test in IEC 60335, Section 14 in mind. Built in a 3U enclosure, it can provide outputs up to 7200v with a virtual impedance of 39 ohm, and is provided with our fast charge power supply to allow repetitive pulses within 3 sec. The waveform generated is in accordance with IEC 61180.  For automated pulse train testing, use our MegaPulse TestMinder option, which controls from a PC.

MegaPulse 1.2x50-7200PF 39 ohm is a general purpose tester with 1.2x50 waveform in accordance with IEC 1180-1.  The peak output can be adjusted between 400 and 7200V.  The tester has a virtual impedance of 39Ω.  There is no defined current waveform.  This pulse is in accordance with the requirements of IEC 60335, paragraph 14, Table 6 up to a rated Impulse Voltage of 6kV.  3 second charge time between pulses.  Polarity can be switched using a front panel switch. 

Option 950 additionally delivers a pulse in accordance with the requirements of IEC 60950 Annex N Table 1, Line N.
Option TMM:  USB Computer Pulse control; 32 bit Windows computer required.
Option RI: PLC Interface Relay Board to customer requirements.
Option HVR: V accuum relay used for pulse switching; reduces low voltage prearcing.
Option I72: IGBT used for <1000V voltage switching.  Eliminates low voltage prearcing.  Option TMM required.
Option BNCV: 1000:1 Voltage BNC.  Reference only.

Available Options

Reviews (0)

Write a Review

Note: HTML is not translated!
    Bad           Good




Download Manual
Megapulse 1.2x50-7200.pdf Download Manual

Contact Us

Corporate Sales Office (USA)

Compliance West USA
650 Gateway Center Way Suite D
San Diego, CA 92102 USA

US Representatives

Product Update Bulletin

Newest Product: HT-3500S RF, "ruggedized" hipot tester

The HT-3500S RF tester is specifically designed for the challenges common to operating in the field. Along with heavy duty internal brackets and a sturdy, shock-absorbing case, this unit includes adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit settings - all controlled from an easy-to-access front panel. Call for pricing.

Read More

Available: 16A option for CDT-240

Perform one of the most difficult tests required with both speed and accuracy. The CDT-240 now offers a 16A option along with designed presets to implement the plug discharge test as described in IEC 61010, 60065 and 60335.

Read More

MegaPulse Defib 5P reaches EOL - Replaced by D5-PF

Compliance West USA is announcing the EOL (End-of-LIfe) of our MegaPulse Defib 5P series effective 07/14/2015. This unit has been replaced by our MegaPulse D5-PF advanced tester. Compliance West will continue to support, repair and calibrate the Defib 5P throughout the terms of any existing warranty agreements or up until the product's End-of-Support date. Please contact us with any questions.

Read More