Surge Tester 1.2x50-5 500ohm 0.5J

  • Surge Tester 1.2x50-5 500ohm 0.5J
  • Product Views

MegaPulse 1.2x50-5 500ohm 0.5J:
Surge Tester 1.2x50-5 500ohm 0.5J

Call for Price

The MegaPulse 1.2x50-5 500Ω 0.5J waveform is designed in accordance with IEEE 1613, Figure 1 and Para. 6.3.2 to test Communications Networking Devices in Electric Power Substations. Specifically, it is used to test autodialers, bridges, ethernet hubs, firewalls, modems, power apparatus, routers and switches for this use. The test is to be conducted once by the user on new devices, and can also be conducted at 3750V peak (75%) at the point of use to determine usability during the life of the equipment.
The waveform is in tolerance with the requirements of IEEE 1613, Figure 1 at 5000V peak output and has an output impedance of 500 ohms (before connection of the DUT). The energy delivered to the source is 0.5J. The MegaPulse’s front panel meter reads the peak output voltage.

Available Options

Reviews (0)

Write a Review

Note: HTML is not translated!
    Bad           Good


  • Built specifically to test on premise to the requirements of IEEE 1613.
  • Produces the exact waveform and energy required by the Standard.
  • Can test to as received and in use periodic testing requirements.
  • Provided with ANSI Calibration good for one year (A2LA/17025 Calibration optional).
  • Lifetime telephone support.
  • One year warranty.


For Specifications, refer to Datasheet, above.
For Specifications, refer to Datasheet, above.


Download Manual
Megapulse rev 5.2 4 page layout.pdf Download Manual

Contact Us

Corporate Sales Office (USA)

Compliance West USA
650 Gateway Center Way Suite D
San Diego, CA 92102 USA

US Representatives

Product Update Bulletin

Newest Product: HT-3500S RF, "ruggedized" hipot tester

The HT-3500S RF tester is specifically designed for the challenges common to operating in the field. Along with heavy duty internal brackets and a sturdy, shock-absorbing case, this unit includes adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit settings - all controlled from an easy-to-access front panel. Call for pricing.

Read More

Available: 16A option for CDT-240

Perform one of the most difficult tests required with both speed and accuracy. The CDT-240 now offers a 16A option along with designed presets to implement the plug discharge test as described in IEC 61010, 60065 and 60335.

Read More

MegaPulse Defib 5P reaches EOL - Replaced by D5-PF

Compliance West USA is announcing the EOL (End-of-LIfe) of our MegaPulse Defib 5P series effective 07/14/2015. This unit has been replaced by our MegaPulse D5-PF advanced tester. Compliance West will continue to support, repair and calibrate the Defib 5P throughout the terms of any existing warranty agreements or up until the product's End-of-Support date. Please contact us with any questions.

Read More