Datasheet

MegaPulse Biphasic PF 360J:
Surge Tester Biphasic PF 360J

Call for Price

The MegaPulse 360J can be used to test products in research and production environments. The biphasic output pulse mimics the newest defibrillator output standard but allows more repeatability and faster pulsing than a defibrillator would.

The output is stable and provides the required 360J power in a production test or continuous test environment. The available autotrigger control provides very repeatable outputs which makes testing results more meaningful.

The MegaPulse 360J is used to prove any part which would be subjected to defibrillator pulses.

The biphasic output reversal timing can be configured at the factory for any timing desired within the pulse. Output power is also configurable upon request.

Output voltage is approximately 2kV, with slight variances to meet the 360J power requirement. Output may be as high as 2040V in order to provide the power required.

With the available 00-MPH Monophasic waveform option, the MegaPulse 360J can also output the truncated isolation waveform of AAMI DF-1, Figure A.2 for additional testing of defibrillator leads.

May be configured with TestMinder P (optional).

Waveforms are available for review in the Manuals section, below.

WIth the configurable T1 and T2, and the monophasic option, this tester is very customizable.  Please call or write with any questions or thoughts.

Available Options

Reviews (0)

Write a Review

Note: HTML is not translated!
    Bad           Good

Features

  • Outputs a biphasic waveform containing 360J power for defibrillation parts testing.
  • Microprocessor controlled wavform reversal for accurate, repeatable waveforms.
  • Rated for continuous operation with one minute pulse times.
  • Customer can specify any time in the waveform for the reversal point.
  • Available autotrigger for extremely repeatable power output pulses.
  • Available Monophasic truncated waveform in accordance with AAMI DF.1 Fig. A.2
  • (Isolation) for lead testing
  • Available TestMinder for computer control of long test sequences
  • 1 year warranty

Specifications

ModelMegaPulse BiPhasic 360J
Please see Datasheet above for details.

Manuals

Download Manual
MegaPulse Biphasic P 360J rev 2.0.pdf Download Manual

Contact Us

Corporate Sales Office (USA)

Compliance West USA
650 Gateway Center Way Suite D
San Diego, CA 92102 USA

US Representatives

Product Update Bulletin

Newest Product: HT-3500S RF, "ruggedized" hipot tester

The HT-3500S RF tester is specifically designed for the challenges common to operating in the field. Along with heavy duty internal brackets and a sturdy, shock-absorbing case, this unit includes adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit settings - all controlled from an easy-to-access front panel. Call for pricing.

Read More

Available: 16A option for CDT-240

Perform one of the most difficult tests required with both speed and accuracy. The CDT-240 now offers a 16A option along with designed presets to implement the plug discharge test as described in IEC 61010, 60065 and 60335.

Read More

MegaPulse Defib 5P reaches EOL - Replaced by D5-PF

Compliance West USA is announcing the EOL (End-of-LIfe) of our MegaPulse Defib 5P series effective 07/14/2015. This unit has been replaced by our MegaPulse D5-PF advanced tester. Compliance West will continue to support, repair and calibrate the Defib 5P throughout the terms of any existing warranty agreements or up until the product's End-of-Support date. Please contact us with any questions.

Read More