Hipot Tester, 0-10KVac @ 10mA / 0-14KVdc @ 5 mA

  • Hipot Tester, 0-10KVac @ 10mA / 0-14KVdc @ 5 mA
  • Product Views
  • Hipot Tester, 0-10KVac @ 10mA / 0-14KVdc @ 5 mA
  • Hipot Tester, 0-10KVac @ 10mA / 0-14KVdc @ 5 mA

Hipot Tester, 0-10KVac @ 10mA / 0-14KVdc @ 5 mA

  • $5,090.00

HT-10KVPAC/DC Hipot Tester, 0-10KVac @ 10mA / 0-14KVdc @ 5 mA. Ships complete with cables, manual, and Calibration Certificate. Made in the USA. Calibration and Repair services available. Not sure - contact us!

Available Options

Reviews (0)

Write a Review

Note: HTML is not translated!
    Bad           Good


  • HT10000P AC: AC output to 10000 Volts. Delivers 1 through 8 milliamps. Custom outputs to 25 mA.
  • HT10000P DC: DC output to 14000 Volts. Delivers 1 through 5 milliamps.
  • Logic Controlled, One-button testing. LED indicators. Buzzer upon failure, test terminates. Test termination defeatable by switch on rear panel. Provided with arc detection circuit to properly detect hipot failures.
  • Rear panel adjustments; leakage limit, ramp time, test time and voltage.
  • Ergonomic design for safety and ease of use.
  • High voltage output jack.
  • Automatic voltage ramp-down circuit eliminates residual voltage.
  • Designed for product development and laboratory use.
  • High efficiency design, low power consumption.
  • All test leads included.
  • Calibrated to NIST standards.
  • 1 year warranty
  • HTT-1 and HTT-1RHipot and Ground Continuity Function Checker Compatible


Voltage Test TypeAC/DC
Voltage Range0-10000 VAC 0-14000 VDC
Current Range3 mA at 10 KVAC 1 mA at 14 KVDC
Input Voltage Requirements108-132 V, 50 /60 Hz, 2A max
Fuse Requirements120 VAC
Arc DetectSeparate high Frequency circuit
Leakage DetectSeparate Low frequency circuit
Ground ContinuityN/A
Ground Continuity CurrentN/A
Test Time Range 1 - 60 seconds
Ramp time Range 1 - 5 Seconds
Voltage Meter Accuracy± 2 %
Current Meter Accuracy±0.1 mA
Resistance measure Range N/A
Resistance auto offset Range N/A
Resistance Measure Accuracy N/A
HV shutdown by Ground FailN/A
Duty cycle100%
Discharge Time (Resistive Load)
Transformer Output< 500 VAC
Pass/Fail Repeatability ± 3 %
Output connector High Voltage Jack
Display 4 digits LED display
Test indicatorLed indicators
Failure IndicatorLed indicators and buzzer
Programable No
PLC InterfaceNo
TestLink N/A
Voltage Hold on failure Available
Top Mounted handleNo
Test Defeat Ramp Time, Test Time and Breakdown Fail
Autoreset on PassOptional
Operation Temperature15 - 40 °C
Relative Humidity Range 0 - 90 % Non-condensing
Dimensions17" Wide x 5 High x 16.75 " Deep
Weight31 lB
Calibration One year calibration Certificate
Test CordsReturn lead, High Voltage Test Lead, Power cord
HTS/Schedule B9030.39.0100
ECCN 3B992


Download Manual
HT/HT-10000P series CE Manual rev 6.0.pdf Download Manual

Contact Us

Corporate Sales Office (USA)

Compliance West USA
650 Gateway Center Way Suite D
San Diego, CA 92102 USA

US Representatives

Product Update Bulletin

Newest Product: HT-3500S RF, "ruggedized" hipot tester

The HT-3500S RF tester is specifically designed for the challenges common to operating in the field. Along with heavy duty internal brackets and a sturdy, shock-absorbing case, this unit includes adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit settings - all controlled from an easy-to-access front panel. Call for pricing.

Read More

Available: 16A option for CDT-240

Perform one of the most difficult tests required with both speed and accuracy. The CDT-240 now offers a 16A option along with designed presets to implement the plug discharge test as described in IEC 61010, 60065 and 60335.

Read More

MegaPulse Defib 5P reaches EOL - Replaced by D5-PF

Compliance West USA is announcing the EOL (End-of-LIfe) of our MegaPulse Defib 5P series effective 07/14/2015. This unit has been replaced by our MegaPulse D5-PF advanced tester. Compliance West will continue to support, repair and calibrate the Defib 5P throughout the terms of any existing warranty agreements or up until the product's End-of-Support date. Please contact us with any questions.

Read More