The MegaPulse 1.2x50/8x20-6PF 2 ohm is our 6kV, 3kA combination tester,
with a 30 second cycle time. It can produce a combination test waveform
at 2 ohms 6kV, in tolerance with EN 61000-4-5.
Built to the requirements of IEC 61000-4-5, Section 6, Para. 6.1.1.
The MegaPulse 1.2x50/8x20-6PF 2 ohm features ungrounded
outputs, and is acceptable for powered testing when used with a suitable
CDN.
Phase control allows pulse insertion at 0-360 degrees on the AC power waveform for powered testing.
The MegaPulse 1.2x50/8x20-6PF 2 ohm is equipped with a relay
allowing switch selected polarity output. With the switch selected
polarity output, users may opt for computer control via our option TestMinder MegaPulse PF, or PLC guided operation with our Relay Isolated
Control board.
The tester charges in less than 60 seconds in accordance with the requirements stated in IEC 61000-4-5. Sold with a one year
warranty and calibrated to NIST Standards. A2LA Cal available at extra
charge.
Waveforms can be viewed in the Manuals Section below.
2000V/1000A
peak, GR-1089 1st Level AC Lightning, and others requiring powered
pulse insertion at specific areas of the mains waveform in accordance with IEC 61000-4-5. IEC 61000-4-5 CDN required
when used for powered testing. 6000V/3000A peak, GR-1089 2nd Level AC Lightning and others. CDN required for powered testing.
Available Options
Reviews (0)
Write a Review
Features
Outputs a combination waveform at 500 - 6kV, 2 ohms.
Front panel switch allows waveform reversal.
Floating outputs are suitable for powered testing with a CDN (not included).
Allows pulse to be placed on mains waveform with Phase Control.
60 second pulse repeat rate.
Can be controlled from PLC or LabView with Option RI.
Outputs up to 500-6000V peak.
Virtual Impedance of 2 ohms.
Available TestMinder for computer control of long test sequences (32 bit Windows required).
ANSI Calibration good for one year included, A2LA/17025 Calibration optional.
The HT-3500S RF tester is specifically designed for the challenges common to operating in the field. Along with heavy duty internal brackets and a sturdy, shock-absorbing case, this unit includes adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit settings - all controlled from an easy-to-access front panel. Call for pricing.
Perform one of the most difficult tests required with both speed and accuracy. The CDT-240 now offers a 16A option along with designed presets to implement the plug discharge test as described in IEC 61010, 60065 and 60335.
Compliance West USA is announcing the EOL (End-of-LIfe) of our MegaPulse Defib 5P series effective 07/14/2015. This unit has been replaced by our MegaPulse D5-PF advanced tester. Compliance West will continue to support, repair and calibrate the Defib 5P throughout the terms of any existing warranty agreements or up until the product's End-of-Support date. Please contact us with any questions.