• Defib-proof and Energy Reduction Tester
  • Product Views
  • Defib-proof and Energy Reduction Tester
  • Defib-proof and Energy Reduction Tester

MegaPulse Defib-5PF-005:
Defib-proof and Energy Reduction Tester

Call for Price

IEC 60601-2-31:2020 Surge Tester, Fig.201.101, 400-900V Peak

Complies with the standard IEC60601-2-31:2020 test

of defibrillation protection, providing a decaying

exponential waveform presented in figure 20.101,

maximum peak voltage of 900V +2.5%, and energy

of 50-55 joules, duration time of 4.05-4.6mS and a

discharge resistor of 50Ω ±1%.

Available Options

Reviews (0)

Write a Review

Note: HTML is not translated!
    Bad           Good


  • Digital output voltage knob on the front panel.
  • Microcontroller technologies.
  • Integrated High Voltage on hold circuit.
  • Front panel indicates internal HV and polarity.
  • Polarity button selector on the front panel.
  • External interlock disables HV output and defeats test when circuit is open.
  • Optional USB TestMinder, computer control.
  • Leads, manual and calibration certificate included.
  • ISO17025 Calibration available.
  • One year calibration cycle.
  • One year warranty.


Max Peak Voltage: 900V ±2%.
Main Capacitance: 120uF ±5%.
Inductances: 25uH ±5%.
Virtual Impedance: 1Ω.
Discharge Resistor 50Ω.
Open Circuit Duration Time: 4.05-4.6mS
Current Waveform: Not defined.
Charge Time: <7 seconds.
Voltage Control: Manually, by turning a knob in the front panel or via USB.
Polarity Control: Positive and Negative. Alternating control available with USB.
Voltage Display: 4 Digit LED Display.
Voltage Meter resolution: 5V.
Voltage Meter Accuracy: ±1%.
Duty Cycle: 12s between pulses, continuous duty.
Line Voltage: 120V AC, 50/60Hz. 230V AC ±10%, 50 Hz ±1 Hz (CE for EU).
Operating Temperature: 15-40ºC.
Relative Humidity Range: 0-90% non-condensing.
Dimensions: 17” wide x 3U high x 17” deep.
Weight: 30 lbs approx.


Download Manual
MegaPulse Defib-5PF-005/MegaPulse Defib-5PF-005 rev 2.pdf Download Manual

Contact Us

Corporate Sales Office (USA)

Compliance West USA
650 Gateway Center Way Suite D
San Diego, CA 92102 USA

US Representatives

Product Update Bulletin

Newest Product: HT-3500S RF, "ruggedized" hipot tester

The HT-3500S RF tester is specifically designed for the challenges common to operating in the field. Along with heavy duty internal brackets and a sturdy, shock-absorbing case, this unit includes adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit settings - all controlled from an easy-to-access front panel. Call for pricing.

Read More

Available: 16A option for CDT-240

Perform one of the most difficult tests required with both speed and accuracy. The CDT-240 now offers a 16A option along with designed presets to implement the plug discharge test as described in IEC 61010, 60065 and 60335.

Read More

MegaPulse Defib 5P reaches EOL - Replaced by D5-PF

Compliance West USA is announcing the EOL (End-of-LIfe) of our MegaPulse Defib 5P series effective 07/14/2015. This unit has been replaced by our MegaPulse D5-PF advanced tester. Compliance West will continue to support, repair and calibrate the Defib 5P throughout the terms of any existing warranty agreements or up until the product's End-of-Support date. Please contact us with any questions.

Read More