Questions? Contact Sales: 800-748-6224
IEC 60601-2-31:2020 Surge Tester, Fig.201.101, 400-900V Peak
Complies with the standard IEC60601-2-31:2020 test
of defibrillation protection, providing a decaying
exponential waveform presented in figure 20.101,
maximum peak voltage of 900V +2.5%, and energy
of 50-55 joules, duration time of 4.05-4.6mS and a
discharge resistor of 50Ω ±1%.
| Max Peak Voltage: 900V ±2%. |
| Main Capacitance: 120uF ±5%. |
| Inductances: 25uH ±5%. |
| Virtual Impedance: 1Ω. |
| Discharge Resistor 50Ω. |
| Open Circuit Duration Time: 4.05-4.6mS |
| Current Waveform: Not defined. |
| Charge Time: <7 seconds. |
| Voltage Control: Manually, by turning a knob in the front panel or via USB. |
| Polarity Control: Positive and Negative. Alternating control available with USB. |
| Voltage Display: 4 Digit LED Display. |
| Voltage Meter resolution: 5V. |
| Voltage Meter Accuracy: ±1%. |
| Duty Cycle: 12s between pulses, continuous duty. |
| Line Voltage: 120V AC, 50/60Hz. 230V AC ±10%, 50 Hz ±1 Hz (CE for EU). |
| Operating Temperature: 15-40ºC. |
| Relative Humidity Range: 0-90% non-condensing. |
| Dimensions: 17” wide x 3U high x 17” deep. |
| Weight: 30 lbs approx. |
| Download Manual | |
| MegaPulse Defib-5PF-005/MegaPulse Defib-5PF-005 rev 2.pdf | Download Manual |
Compliance West USA
650 Gateway Center Way Suite D
San Diego, CA 92102 USA
The HT-3500S RF tester is specifically designed for the challenges common to operating in the field. Along with heavy duty internal brackets and a sturdy, shock-absorbing case, this unit includes adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit settings - all controlled from an easy-to-access front panel. Call for pricing.
Perform one of the most difficult tests required with both speed and accuracy. The CDT-240 now offers a 16A option along with designed presets to implement the plug discharge test as described in IEC 61010, 60065 and 60335.
Compliance West USA is announcing the EOL (End-of-LIfe) of our MegaPulse Defib 5P series effective 07/14/2015. This unit has been replaced by our MegaPulse D5-PF advanced tester. Compliance West will continue to support, repair and calibrate the Defib 5P throughout the terms of any existing warranty agreements or up until the product's End-of-Support date. Please contact us with any questions.
