The MegaPulse 1.2×50/8×20-2.5PF 12Ω is our 2.5kV, 12Ω combination tester, with a 30 second cycle time. It can produce a combination test waveform at 12Ω 2.5kV, in tolerance with EN 60060.
Features grounded outputs, and is acceptable for unpowered testing. Not for powered testing with a CDN.
The MegaPulse 1.2×50/8×20-2.5PF 12 ohm is equipped with a relay allowing switch selected polarity output. With the switch selected polarity output, users may opt for computer control via our TestMinder option or PLC guided operation with our Relay Isolated Interface option.
The tester charges in less than 30 seconds. Sold with a one year warranty and calibrated to NIST Standards. ISO17025 Calibration available at extra charge.
Waveforms can be viewed in the Manuals Section below.
Specifications
TESTING CIRCUITRY
Max Output Peak Voltage: 2500V.
Open Circuit Rise Time: 1.2uS, ±30% (Trise=1.67*(T90%-T30%).
Open Circuit Duration Time: 50uS, ±20%.
Short Peak Current: 208.33A @ 2500V, ±10%.
Shor Circuit Rise Time 8uS ±10% (Trise=1.25*(T90%-T10%).
Short Circuit Duration Time: 20uS, ±10%.
Voltage Control: Manually, by turning a knob in the front panel or via USB.
Polarity Control: Positive and Negative. Alternating control available with USB.
Voltage Display: 4 Digit LED Display.
Voltage Meter resolution: 5V.
Voltage Meter Accuracy: ±1%.
Duty Cycle: 30s between pulses.
ELECTRICAL
Line Voltage: 120V AC, 50/60Hz. Optional 230V AC ±10%, 50 Hz ±1 Hz (CE for EU).
SAFETY
Safety Interlock 2-pin terminal block on rear panel; shorted for operation.
OUTPUTS – FRONT
OUTPUT: High Voltage insulated rigid 4mm socket – Red.
RETURN: High Voltage insulated rigid 4mm socket – Black.
OUTPUTS – REAR
TESTMNINDER: DB9 Female.
Inlet Module: Inlet module with fuse and power switch combination.
