• Surge Tester 1.2x50/8x20-2P PC 2 ohm
  • Product Views
  • Surge Tester 1.2x50/8x20-2P PC 2 ohm

MegaPulse Combination Tester, 2kV/1kA 2Ω, for use with a CDN:
Surge Tester 1.2x50/8x20-2P PC 2 ohm

Call for Price

The MegaPulse 1.2x50/8x20-2P PC 2 ohm is our 2kV, 1kA combination tester, with a 30 second cycle time. It can produce a combination test waveform at 2 ohms 2kV, in tolerance with EN 60060.

The  MegaPulse 1.2x50/8x20-2P PC 2 ohm features ungrounded outputs, and is acceptable for powered testing when used with a suitable CDN. 

Phase control allows pulse insertion at 0, 90, 180 and 270 degrees for powered testing.

The MegaPulse 1.2x50/8x20-2P PC 2 ohm is equipped with a relay allowing switch selected polarity output. With the switch selected polarity output, users may opt for computer control via our option TestMinder MegaPulse, or PLC guided operation with our Relay Isolated Control board.

The tester charges in less than 30 seconds. Sold with a one year warranty and calibrated to NIST Standards. A2LA Cal available at extra charge.

Waveforms can be viewed in the Manuals Section below.

2000V/1000A peak, GR-1089 1st Level AC Lightning, and others requiring powered pulse insertion at specific areas of the mains waveform. CDN required when used for powered testing.

Available Options

Reviews (0)

Write a Review

Note: HTML is not translated!
    Bad           Good


  • Outputs a combination waveform at 400 - 2kV, 2 ohms.
  • Front panel switch allows waveform reversal.
  • Floating outputs are suitable for powered testing with a CDN (not included).
  • Allows pulse to be placed on mains waveform with Phase Control.
  • 30 second pulse repeat rate.
  • Can be controlled from PLC or LabView with Option RI.
  • Outputs up to 400-2000V peak.
  • Virtual Impedance of 2 ohms.
  • Available TestMinder for computer control of long test sequences (32 bit Windows required).
  • ANSI Calibration good for one year included, A2LA/17025 Calibration optional.
  • 1 year warranty.


For Specifications, see Datasheet above.
For Specifications, see Datasheet above.


Contact Us

Corporate Sales Office (USA)

Compliance West USA
650 Gateway Center Way Suite D
San Diego, CA 92102 USA

US Representatives

Product Update Bulletin

Newest Product: HT-3500S RF, "ruggedized" hipot tester

The HT-3500S RF tester is specifically designed for the challenges common to operating in the field. Along with heavy duty internal brackets and a sturdy, shock-absorbing case, this unit includes adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit settings - all controlled from an easy-to-access front panel. Call for pricing.

Read More

Available: 16A option for CDT-240

Perform one of the most difficult tests required with both speed and accuracy. The CDT-240 now offers a 16A option along with designed presets to implement the plug discharge test as described in IEC 61010, 60065 and 60335.

Read More

MegaPulse Defib 5P reaches EOL - Replaced by D5-PF

Compliance West USA is announcing the EOL (End-of-LIfe) of our MegaPulse Defib 5P series effective 07/14/2015. This unit has been replaced by our MegaPulse D5-PF advanced tester. Compliance West will continue to support, repair and calibrate the Defib 5P throughout the terms of any existing warranty agreements or up until the product's End-of-Support date. Please contact us with any questions.

Read More