HT-2000: AC Output/Ground Continuity

The HT-2000 AC Hipot tester 0-2000V, up to 20mA

• The most user-friendly hipot/continuity tester on the market today, at an attractive price. Watch to see how easy it is to operate!
• Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
• Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel.
• Simple test outcome judgement. Green lights mean pass - red lights mean fail. Failing tests sound a buzzer as well.
• Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate included.
• In-depth testing. Both Arc Dectection and Leakage Current circuits test the product for more accurate testing.
  RED lights and a buzzer leave no question if a failure has occurred.
• Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™.
• Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1.

Video: Using a Compliance West Hipot/Ground Continuity Tester

Video: Hipot Testing for Products without a Power Cord

Video: TestLink: Connection and Setup

    TOP

AC Hipot testing is best for:

• Portable Lamps
• Fixtures
• Medical Equipment in the Patient Care area
• Products not using Y capacitors.
• Other applications where AC Hipot Testing is mandated

    TOP

Option J2 and J3: Jumpers for testing products without plugs
Option TL: TEST-LINK™ upgrade
Option HAN: Carrying Handle
Option TM: TestMINDER automation software
Option HC: High Current Output (40mA @ 2000Vac)
Option 240: 220/240V only operation.
Option AR: Auto Reset on Pass
Option RI: PLC Interface Board
Option LC: Leakage Current Display
Option LI: Line Current Measurement
Option LR: Line Resistance Measurement
Option AH: High Voltage Output (2500Vac, 20mA)
Option LLC: Low Current Trip Point (10uA min)
Option HO: Front Panel High Voltage Receptacle
Option HVP: HV Probe
Option HTT-1: HTT-1 Hipot and Ground Continuity Function Checker

    TOP

AC output to 2000 Volts. Delivers up to 20 milliamps. Provided with arc detection circuit to properly detect hipot failures.

Meets all requirements for UL/CSA/IEC/CE production line testing. Logic controlled, One-Button testing. LED's indicate test progress. Upon failure buzzer sounds and test is terminated.

Output voltage, leakage current limit, voltage ramp time, and test duration are adjustable from the rear panel.

Ground continuity is defeatable for testing two wire products.

NEMA 5-15R receptacle provided on front panel for high voltage output makes for easy testing of finished products.

Automatic voltage ramp-down circuit eliminates residual voltage

Operation instructions on rear panel.

Performs to safety Agency requirements for product line testing.

Calibration resistor mounted on rear panel for easy calibration.

All test leads included.

30 day trial- 1 year warranty

    TOP