You can download our product manuals in P.D.F format here.
MegaPulse Surge Testers listed by Application:
Medical Products: Go to our Medical Testers Page
Testing in EN60950 & UL/CSA1950: EN-60950 / UL-1950
Testing in EN62052-11: MegaPulse Testers
Testing in EN60335: MegaPulse Testers
Testing in IEC384: MegaPulse Capacitor Testers
Testing in FCC Part 68: Telephone and Power line Surge Testers
Lightning Protection Test Equipment: TE001
UL 746E Conformal Coating Surge Tester: MegaPulse 746E
Testing in GR-1089-CORE: MegaPulse 1089 Series
| 360J
|
MegaPulse 360J Biphasic Waveform Tester The newest addition to Compliance West USA’s line of Medical Surge tester is the MegaPulse 360J Biphasic Waveform Tester, featuring. More… |
| Defib-5  |
IEC 601/EC-13 Defib-proof circuit testing We have developed the Defib-5 for testing defibrillation-proof circuits. We have developed the DF-1 for testing defibrillation leads in accordance with AAMI DF-1, Annex A. More… |
DF-1
|
AAMI DF-1 Lead Connector Isolation Tester The DF-1 Cutoff Tester is designed to generate the waveform described in. More… |
Defib Surge Tester
|
EN45502 Sec. 20 Defib Surge Tester The MegaPulse Defib Surge is designed to conduct the test shown in EN 45502-1:1997 Sec. 20, "Protection of the device from damage caused by external defibrillators". More… |
DF-80
|
AAMI DF80 App. DD 360J Damped Sinusoid Tester The MegaPulse DF80 DSW Surge Tester is designed to conduct the test shown in AAMI DF80, App. DD, Table US.DD.1 and Figure US.DD.1 - Damped sinusoidal waveform parameters. More… |
| EN-60950 / UL-1950
|
Surge Testing in EN 60950, the Standard for Continuing the Compliance West USA notion that smaller and cheaper is better if the job gets done, we introduce to you our line of surge testers for. More… |
MegaPulse
|
MegaPulse 1.2x50-12.3 500 ohm Surge Testing of Electricity Metering Equipment We have impulse test equipment for the tests in Clause 7.3.2. Our test equipment covers the entire table up to 12.3kV. More… |
MegaPulse
|
Surge Testing for spacings in EN 60335, the Standard for Household Equipment We have impulse test equipment for the tests in Section 14. Our test equipment covers the entire table up to 12kV. More… |
| MegaPulse
|
MegaPulse Capacitor Series: Surge Testing of Capacitors to the requirements of IEC 384 The MEGAPULSE Capacitor Series is designed to test capacitors in accordance with IEC384-14, Annex A, Table XVI. More… |
MegaPulse
|
MegaPulse Telephone Line Surge and Power Line Surge Test Equipment for the Tests in TIA/EIA-IS-968 (formerly FCC Part 68) The tests required in TIA/EIA-IS-968 include Telephone Line Surge, Type A and B, and Power Line Surge as described in Paragraph 68.302. More… |
TE001
|
MegaPulse Telephone Surge Test Equipment for the Lightning Protection Tests in TE001 The tests required in TE001, Para. 17 are done with Pulse Characteristics as described in Para. 17.1.4. Compliance West USA offers surge equipment that will. More… |
MegaPulse 746E
|
MegaPulse 746E: Surge Testing of Conformal Coatings UL 746E Section 19 covers requirements for conformal coatings used instead of electrical spacings to increase the dielectric withstand voltage between… More… |
| MegaPulse 1089 Series
|
MegaPulse Surge Test Equipment for the Tests in GR-1089, Issues 1, 2 and 3 There are many surge tests required in the GR-1089-CORE Standards, Issues 1, 2 and 3. Compliance West offers test equipment to many of them,… More… |
MegaPulse Surge Testers listed by Waveform:
Voltage waveform only: 1.2x50 uSec 39 ohm: 2.5kV or 7kV maximum. 12kV maximum.
Voltage waveform only: 1.2x50 uSec 12 ohm: 7200V or 12kV maximum.
Voltage waveform only: 1.2x50 uSec 500 ohm 12.3kV maximum.
Voltage waveform only: 10x700 uSec 39 ohm: 2.5kV or 7kV maximum
Combination Tester: 1.2x50/8x20 uSec 2 ohm 4kV max (with phase control) -Call-
Combination Tester: 1.2x50/8x20 uSec 2 ohm 6kV max (with phase control) -Call-
Combination Tester: 1.2x50/8x20 uSec 5 ohm 7kV max (with phase control) -Call-
Combination Tester: 1.2x50/8x20 uSec 2 ohm 2kV max 1 ch
Combination Tester: 1.2x50/8x20 uSec 2 ohm 6kV max 1 ch
Combination Tester: 10x700/5x320 uSec 40 ohm 4kV max -Call-
Coupling-Decoupling Network (CDN): To EN61000-4-5 Fig. 7: 240V 8A max -Call-
Coupling-Decoupling Network (CDN): To EN61000-4-5 Fig. 7: 240V 15A max -Call-
Coupling-Decoupling Network (CDN): To EN61000-4-5 Fig. 8: 400V 4A 3 phase -Call-
Symmetrical Tester: Voltage 10x1000 uS; Current 10x1000 uS 10 ohm 1kV 1 channel
Symmetrical Tester: Voltage 10x1000 uS; Current 10x1000 uS 10 ohm 1kV 2 channel
Symmetrical Tester: Voltage 2x10 uS; Current 2x10 uS 5 ohm 2.5kV 2 channel
Symmetrical Tester: Voltage 10x1000uS, Current 10x1000uS 10 ohm 2kV max, 1 channel (for GR-1089 Protection Coordination Test and others) -Call-
Symmetrical Tester: Voltage 10x250uS, Current 10x250uS 10 ohm 5kV max, 2 channel
Symmetrical Tester: Voltage 2x10uS, Current 2x10 uS, 8 ohm 1kV max, 1 ch, Intrabuilding Lightning Test Surge 1 only (800V, 100A)
Symmetrical Tester: Voltage 2x10uS, Current 2x10uS, 8/15 ohm, 1.5kV, 2 channel
Symmetrical Tester: Voltage 2x10uS, Current 2x10uS, 8/10/15 ohm, 7kV, 1 channel -Call-
Symmetrical Tester: Voltage 2x10uS, Current 2x10uS, 2 ohm, 2kV, 1 channel
