Leakage Current Box, IEC 61010-1:2010 Fig. A.2 (dc to 100Hz)

  • Leakage Current Box, IEC 61010-1:2010 Fig. A.2 (dc to 100Hz)
  • Product Views
  • Leakage Current Box, IEC 61010-1:2010 Fig. A.2 (dc to 100Hz)
  • Leakage Current Box, IEC 61010-1:2010 Fig. A.2 (dc to 100Hz)
Datasheet

LCB-5:
Leakage Current Box, IEC 61010-1:2010 Fig. A.2 (dc to 100Hz)

  • $600.00

Compliance West’s line of Leakage Current Networks are built in accordance with IECEE OD-5013, “Leakage (Touch) Current Measurement Instruments”; and are in compliance with IECEE OD-5014, "Instrument Accuracy Limits, specifically "Leakage (Touch) Current" Section; and IEC 60990.  Our Leakage Current Networks use very accurate components which do not drift due to heat or age, and we specially trim each component in each leakage current box we make to be accurate.  

Read Pete Perkins' First Look Evaluation.

Resistors and capacitors have a tolerance of ±1%, verified during the calibration process.     

All components used are designed for low parasitic inductance and capacitance, and the physical layout of the components is optimized for higher frequencies.

The metal box and ground plane of the circuit board are joined via solid contact to provide shielding of the network, and leads are shielded. 

A calibration report is provided with each instrument.

Each box ships with the Leakage Current Network embossed on the front panel.  Leads provided are alligator clips, and they can be changed to any desired configuration by the operator in the field.

We provide Leakage Networks for most Standards.

Reviews (0)

Write a Review

Note: HTML is not translated!
    Bad           Good

Features

  • Provides networks for - IEC 61010-1:2010 Fig. A.2.
  • Portable, lightweight. Measures 2.40 x 1.15 x 4.45 inches.
  • No batteries or power required.
  • Custom test leads available.
  • Provided with NIST Calibration; A2LA calibration available.
  • One year warranty.

Specifications

For specification information, please see Datasheet Link above.
For specification information, please see Datasheet Link above.

Manuals

Download Manual
LCB manual rev 3.0.pdf Download Manual

Contact Us

Corporate Sales Office (USA)

Compliance West USA
650 Gateway Center Way Suite D
San Diego, CA 92102 USA

US Representatives

Product Update Bulletin

Newest Product: HT-3500S RF, "ruggedized" hipot tester

The HT-3500S RF tester is specifically designed for the challenges common to operating in the field. Along with heavy duty internal brackets and a sturdy, shock-absorbing case, this unit includes adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit settings - all controlled from an easy-to-access front panel. Call for pricing.

Read More

Available: 16A option for CDT-240

Perform one of the most difficult tests required with both speed and accuracy. The CDT-240 now offers a 16A option along with designed presets to implement the plug discharge test as described in IEC 61010, 60065 and 60335.

Read More

MegaPulse Defib 5P reaches EOL - Replaced by D5-PF

Compliance West USA is announcing the EOL (End-of-LIfe) of our MegaPulse Defib 5P series effective 07/14/2015. This unit has been replaced by our MegaPulse D5-PF advanced tester. Compliance West will continue to support, repair and calibrate the Defib 5P throughout the terms of any existing warranty agreements or up until the product's End-of-Support date. Please contact us with any questions.

Read More