Ground Continuity Tester, 10-200A output, metered

  • Ground Continuity Tester, 10-200A output, metered
  • Product Views
Datasheet

GFM-200A:
Ground Continuity Tester, 10-200A output, metered

  • $3,050.00

The GFM-200AC is designed for testing where very high currents are needed to judge connection resistance. The front panel allows adjustment of the AC current up to 200 amps. The dual meter front panel simultaneously displays both current through and voltage across the grounding circuit of the unit under test. Provided with leads, manual and calibration certificate.

Available Options

Reviews (0)

Write a Review

Note: HTML is not translated!
    Bad           Good

Features

  • AC output - constant current delivers up to 200 amps at up to 5 volts for ground resistance measurements of up to 12.5 milliohms. Current is adjustable from the front panel.
  • Analog meter indicates output current and voltage.
  • Four wire voltage measurement for accuracy.
  • Rear panel outputs for safety.
  • Test leads included. Calibrated to ANSI Z540 Standards.
  • Higher current models available. Consult factory.

Specifications

ELECTRICAL
Voltage Test TypeAC
Output0-200A +/-3% - short circuit to 12.2mOhms
Voltage5V max at open circuit
Meters0-60V AC +/-3% full scale, 0-200A AC +/-3% full scale
ENVIRONMENTAL
Operation Temp15-40 C
Relative Humidity Range0-90% non-condensing
GENERAL
Input Power Requirements120V, 50/60 Hz, (220, 230 or 240 available)
Dimms11.25"(W) x 4.25"(H) x 12.00"(L)
Wt30lbs

Manuals

GFM-200A Datasheet Ver 2.pdf Download Manual
GFM-200A rev 3.pdf Download Manual

Contact Us

Corporate Sales Office (USA)

Compliance West USA
650 Gateway Center Way Suite D
San Diego, CA 92102 USA

US Representatives

Product Update Bulletin

Newest Product: HT-3500S RF, "ruggedized" hipot tester

The HT-3500S RF tester is specifically designed for the challenges common to operating in the field. Along with heavy duty internal brackets and a sturdy, shock-absorbing case, this unit includes adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit settings - all controlled from an easy-to-access front panel. Call for pricing.

Read More

Available: 16A option for CDT-240

Perform one of the most difficult tests required with both speed and accuracy. The CDT-240 now offers a 16A option along with designed presets to implement the plug discharge test as described in IEC 61010, 60065 and 60335.

Read More

MegaPulse Defib 5P reaches EOL - Replaced by D5-PF

Compliance West USA is announcing the EOL (End-of-LIfe) of our MegaPulse Defib 5P series effective 07/14/2015. This unit has been replaced by our MegaPulse D5-PF advanced tester. Compliance West will continue to support, repair and calibrate the Defib 5P throughout the terms of any existing warranty agreements or up until the product's End-of-Support date. Please contact us with any questions.

Read More