MegaPulse DF-1P Current Carrying

The DF-1P megapulse Tester is designed to generate the waveform described in AAMI DF-1, Figure B.2., for the connector cavity current-carrying test in AAMI DF-1, Annex B. The test can be set to automatically conduct the first 490 cycles (500 ± 50 as show in standar)of the test, and then stop testing to allow laboratory personnel monitor the last 10 cycles in accordance with the Standard. Voltage and current BNC outputs make waveform analysis convenient. For example, please take a look at the output voltage and current waveforms.

Our TestMinder computer control is included to allow automated repetitive testing.

A front-panel switch reverses the output polarity. Additionally provided with BNC oscilloscope output for voltage (100:1) and current (1V/A) for output monitoring.

The waveform output is 1.05uSec rise time, with a 18mS duration, with an output impedance of 15 ohms.

MegaPulse DF-1P Current carrying Tester ships complete, ready to perform the DF-1 test:

• TestMinder to conduct automated repetitive testing
• BNC Current Jack (1V/mA)
• BNC Voltage Jack (100:1)
• Cables
• Graphs of theoretical and actual waveforms
• Calibration Certificate.
• One-year warranty.

MegaPulse DF-1P Current carrying Tester.

    TOP

Maximum Voltage output		1300 V
Current Duration		18 mS
Meter accuracy		±5 %
Operation temperature		15-40 °C
Relativity humidity range		0-90 % Non condensing
Standards		AAMI DF-1 App B
		Figure B.2
Storage		No
Product weight		35 Lbs
Warranty		1 Year
Calibration		1 year
ECCN number		3B992
HTS/Schedule B		9030.39.0100
Product Dimensions		17 w x 17 L x 6 H
PLC interface		Optional
Autotriger		Optional
Continuos Full voltage		Optional
Testminder		Optional
Energy calculation		Optional
Power supply voltage		120 VAC 50/60 Hz
what is in the box		Megapulse DF-1P Current carrying
		2 high voltage Test leads
		18 AWG Line power cord
		Instruction manual
Interfaces I/O		USB
Price		Call

 

    TOP

Option: 240-240V Mains power (requires 3U enclosure)
Option: IG-Optional IGBT Switch
Option MPH: Monophasic 200uF waveform addition...
Option P6015: High accuracy Tektronix Probe for proper waveform measurement

    TOP

Generates the waveform required for the Current carrying Test, AAMI DF-1, Appendix B, and described in AAMI DF-1, Figure B.2.

Designed with operator safety in mind: Set up the EUT to the right and behind the tester, and a right-handed operator will find himself standing to the left of the tester, allowing maximum separation.

Theoretical graphs and actual graphs showing the output of your tester are included with each MegaPulse DF-1P, allowing easy sanity checks and proof to visiting agency engineers of test setups.

BNC Oscilloscope outputs allows quick connection and easy evaluation of voltage and current output waveforms.

Reverse polarity waveforms available by pushing a button on the front panel. No need to change the test setup. Positive polarity indication minimizes errors.

TestMinder computer control allows automation of the required 490 cycles; then the operator can conduct the last 10 cycles in which the current waveform must be monitored. (Waveform capture is not provided).

1-year calibration cycle.

All test leads included.

1 year warranty

    TOP