PT-600 60 Hz Over Voltage Test System

The PT-600 is designed to perform the 60 Hz power line cross test/AC power fault tests required in BELCORE 1089, UL 1950 and ITU-T Standards for telecommunications equipment.

Models are available in single or dual channel for 2 and 4 wire testing, and with channel outputs of 40 amps for UL Testing, or 60 amps for BELCORE testing, per channel output. Single and dual channel versions are available.
The PT-600 has easy to use controls and output terminals making test set up simple and efficient. The Preset and Adjustable Time Settings and the Preset and Variable Resistors provide for versatility in performing a wide variety of tests.

Measuring Terminals including Voltage Sense and Current Shunt portals provide a safe location for users to accurately measure test voltages and output current while setting up tests. 5-way output terminals are available for the various source impedance requirements making test set up straightforward and hassle-free. The PT-600 has many safety features: front and rear door interlock switches, emergency stop, and fuse protected output terminals for added safety.

Calibration of the PT-600 is designed to be performed with a simple handheld multi-meter and the removable Currents Shunts can be easily sent to a calibration laboratory if required.
Computer controlled operation is available with the TestMinder PT option.

For more information or a quotation, please call Jeff Lind at Compliance West USA,
(800) 748-6224.

    TOP

Tests conducted by the Base Models are:

UL 1950 Annex NAC:
(All models) All M-Tests.
(All 2-channel PT-600's) All M-, L- and F-Tests except Test L5.
BELCORE GR-1089 (Model PT-600-480-2-60 only):
Table 4-7, First-level AC power Fault Test; Tests 1, 2, 3, 6 & 7.
Table 4-8 Second-level AC Power Fault Test; Tests 2, 3 & 4 (except note 8).

Optional Tests:

UL 1950 Annex NAC:
Test L5.
BELCORE GR-1089 (Model PT-600-480-2-60 only):
Clause 4.5.11
Clause 4.5.14
Clause 4.5.15.1, condition 1 and condition 2.
Clause 4.5.16
Table 4-7, Tests 4, 5, 8 & 9.
Table 4-8, Tests 1, 4 (note 8) & 5.
ITU-T Tests (Model PT-600-480-2-60 only):

• Power Induction and Earth Potential Rise. For tests conducted, and reference to ITU-T Standards, click here.

Option TMP: TestMINDER TestMinder PT automation software.

The PT-600 can conduct power cross tests specified by UL 1950/60950 and Bellcore/Telcordia GR1089, as well as the High Impedance Inductive Source Test specified in GR-1089. Some options may be required.

Optional tests include the ITU-T Power Induction and Earth Potential Rise tests

Areas of use are (1) Line Cross Power Test (2) First Level AC Fault Test, (3) 600Vac 2 ohm Test per GR1089 Second Ed., Clause 4.5.11, (4) High-Impedance Inductive Source Test, and (5) ITU-T Power Induction and Earth Potential Rise (with correct options).

Equipped with an E-Stop button on the front panel, and external interlock terminal, for user safety. All outputs are covered by an interlocked door to avoid operator contact with live outputs.

Optional fuse monitoring can speed testing.

Outputs can include up to 600V, 10 Ohm impedance (60A), by two channels for 5 seconds max. and 600V 2 ohms (with line simulator fuse).

Continuously variable 0-600V, 90-13.6Kohm continuous duty outputs for setting output just under the protection limit.

TestMinder PT is standard and allows automatic test management for multiple tests at same output. Tests can also be conducted from the front panel of the PT-600.

Adjustable time settings are available for programming from the front panel for special test durations.

Custom outputs and configurations are available. Contact factory.