VIDEO: HTT-1 Demonstration of a shift-by-shift hipot function check.
Your hipot tester meter reads 1200 volts. How do you know that the test voltage is getting to your product? Have you plugged the product into the correct output? Are your test cables still good?
The HTT-1 was designed to provide a fast, safe and reliable way to verify proper operation of Dielectric Withstand (hipot) and Ground Continuity Testers between calibration cycles. It allows the operator to check the result of the three failure modes encountered in production hipot and ground circuit testing (open ground, high leakage current, and dielectric breakdown) separately or in any combination to verify proper test equipment operation. A passing test can also be simulated.
The test leads allows connection of the HTT-1 to any hipot tester using a standard NEMA 15A receptacle and banana plug return leads to connect to the EUT. The manual contains anticipated results and suggests testing procedures.
The maximum voltage the HTT-1 can test is 2000Vac/3000Vdc.
Provided with test leads and manual
The HTT-1 was designed to provide a fast, safe and reliable way to verify proper operation of Dielectric Withstand (hipot) and Ground Continuity Testers between calibration cycles.
TOPOption: None
