Compliance West USA Hipot Testers Header

HT-5000P: AC/DC Output

HT-5000P

A 5000V AC/ 6000VDC hipot tester that's easy to use and priced right. All the features you need but none of the ones that you pay for but use only once. Select AC or DC output via front panel button. Simple for production line personnel, easy to set up.

When a problem is found, the operator can defeat the leakage current limit and dielectric breakdown shutoffs to allow troubleshooting and analysis of problems with the DUT.

The HT-5000P includes precision leakage current and test time setup and viewing from the LED meter. Adjustment is made with no HV output.

$1695 with an included Calibration Certificate to MIL-STD 45662-A, manual and return lead. Always in stock. Ready to test out of the box.

Video: HT-5000P Testing Overview
Video: Setting Test Time and Leakage Current Limits with a HT-5000P
Video: HT-5000P Setting and Using the Defeat Switches

    TOP

HT-5000P AC/DC Hipot Tester

 

Voltage Test Type AC/DC
Voltage Range 0-5000 AC  0-6000 DC
Current Range 1-10  mA AC   1-5 m A DC
Input Voltage Requirements 117-127 V, 50 /60 Hz
Fuse Requirements See Rear Panel for correct rating
Arc Detect Separate high Frequency  circuit 
Leakage Detect Separate Low frequency circuit 
Test Time Range 1 - 60 seconds
Ramp time Range 1 - 5 Seconds
Voltage Meter Accuracy ± 2 %
Duty cycle 100%
Discharge Time (Resistive Load) Factory Set  8 Sec max
Transformer Output < 500 VAC
Pass/Fail Repeatability ± 3 %
Output connector High Voltage Jack
Display 4 digits LED display
Test indicator Led indicators
Failure Indicator Led indicators and buzzer
Programable No
PLC Interface Optional
TestLink No
Testminder No
Voltage Hold on failure Available
Top Mounted handle Optional
Test Defeat

 

-Ramp Time

-Test Time

-Breakdown Detect

Autoreset on Pass Optional
Operation Temperature 15 - 40 °C
Relative Humidity Range 0 - 90 % Non-condensing
Dimensions 10" wide x 5" high x 12" deep
Weight 17.5 Lb
Calibration One year calibration Certificate
Test Cords

 

Return lead

High Voltage Test Lead

Power cord


    TOP

  • High precision leakage current and duration settings.
  • Allows no load setup of leakage current and test dwell times.
  • Once entered, leakage current and test dwell times can be referenced on the front panel display at any time.
  • Leakage currents can be set from 1-10 mA AC or 1-5mA DC in 0.1mA increments.
  • Dwell times can be set from 1-60 seconds in 1 second increments.
  • Small and light. 11.25" wide x 4.75" high x 11" deep. 16 lbs.
  • Leakage current and dielectric breakdown shutdowns can be defeated to allow troubleshooting of problems.
  • Simple test outcome judgement. Green lights mean pass - red lights mean fail. Failing tests sound a buzzer as well.
  • NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
  • Operation Instructions are printed on the rear panel for easy reference.
  • In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems.
    RED lights and a buzzer leave no question if a failure has occurred.

    TOP

Ticket info - call 800-555-1212


RELATED PRODUCTS

What do customers ultimately buy after viewing this item?

HTT - 1

GF-30AC

TESTLINK™