HT-2800: DC Output/Ground Continuity

The HT-2800 DC Hipot tester 0-2800V, up to 5mA

• The most user-friendly hipot/continuity tester on the market today, at an attractive price. Watch to see how easy it is to operate!
• Two tests with one setup. Conducts UL/CSA Ground continuity and DC Hipot tests with one setup, so no additional equipment is needed.
• Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel.
• Simple test outcome judgement. Green lights mean pass - red lights mean fail. Failing tests sound a buzzer as well.
• Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate included.
• In-depth testing. Both Arc Dectection and Leakage Current circuits test the product for more accurate testing.
  RED lights and a buzzer leave no question if a failure has occurred.
• Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™.
• Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1.

The HT-2800 is a production line DC Hipot Tester. It can generate up to 2800V
at 5mA. This tester performs the dielectric withstand and ground continuity production line tests required by UL and CSA.

For TUV, Nemko and other European agency production line testing, add the
GF-30ac to conduct the additionally required High Current Ground Bonding Test. To conduct both tests with one setup, add the Test-Link.

High voltage and many other options are available as well. Our option list for the HT-2800 is below.

Provided with leads, manual and calibration certificate traceable to the NIST.
Compatible with our shift-by-shift function checker, the HTT-1.

    TOP

DC Hipot testing is best for:

• Computers
• Telephone Central Station Equipment
• Longer or spooled cables and wires
• Products using Y capacitors for RFI supression
• Manufactured Homes, Modular Homes and Motorcoaches

    TOP

Option J2 and J3: Jumpers for testing products without plugs
Option TL: TEST-LINK™ upgrade
Option HAN: Carrying Handle
Option TM: TestMINDER automation software
Option HC: High Current Output (40mA @ 2000Vac)
Option 240: 220/240V only operation.
Option AR: Auto Reset on Pass
Option RI: PLC Interface Board
Option LC: Leakage Current Display
Option LI: Line Current Measurement
Option LR: Line Resistance Measurement
Option AH: High Voltage Output (2500Vac, 20mA)
Option LLC: Low Current Trip Point (10uA min)
Option HO: Front Panel High Voltage Receptacle
Option HVP: HV Probe
Option HTT-1: HTT-1 Hipot and Ground Continuity Function Checker

    TOP

DC output to 2800 Volts. Delivers up to 5 milliamps. Provided with arc detection circuit to properly detect hipot failures.

Meets requirements for UL/CSA/IEC/CE production line testing. Logic controlled, One-Button testing. LED's indicate test progress. Upon failure buzzer sounds and test is terminated.

Output voltage, leakage current limit, voltage ramp time, and test duration are adjustable from the rear panel.

Ground continuity is defeatable for testing two wire products.

NEMA 5-15R receptacle provided on front panel for high voltage output makes for easy testing of finished products.

Automatic voltage ramp-down circuit eliminates residual voltage.

Operation instructions on rear panel.

Performs to safety Agency requirements for product line testing.

Calibration resistor mounted on rear panel for easy calibration.

All test leads included.

30 day trial- 1 year warranty

    TOP