HT-25kVdc: up to 25Kv Dc

The HT-25kVdc is available for high voltage dielectric withstand testing in a DC Voltage output design. The front panel voltage dial-up makes this unit easy to use. Test termination on failure, voltage ramp time, and the test timer may be disabled for specific research.

Provided with leads, manual, and calibration certificate.

VIDEO: HT-25kvdc Hipot Tester Demonstration

    TOP

The HT-25kVdc is available for very high voltage dielectric withstand testing, in either an AC Voltage or DC Voltage output design.

    TOP

Option RI: PLC Interface Board
Option VF: Voltage hold on failure
Option XI: External interlock input
Option SV: Safe voltage output
Option LL: Low Leakage Current Limit

    TOP

Front panel meters show voltage and current of test in progress.

HT-25000 DC: DC output to 25Kv. Delivers 5mA to 18kV, derated linearly to 2mA at 25kVdc.

Logic Controlled, One-button testing. LED indicators. Buzzer upon failure, test terminates. Test termination defeatable by switch on rear panel. Provided with arc detection circuit to properly detect hipot failures.

Rear panel adjustments; leakage limit, ramp time, test time and voltage.

Ergonomic design for safety and ease of use.

High voltage output jack.

Automatic voltage ramp-down circuit eliminates residual voltage.

Designed for product development and laboratory use.

High efficiency design, low power consumption.

Calibration resistor mounted on rear panel for easy calibration.

All test leads included.

Calibrated to NIST standards.

1 year warranty

HTT-1 Hipot and Ground Continuity Function Checker Compatible

    TOP