GR-1089, Table 4-2, Surges 1 and 3:

MegaPulse 10x1000s-1 (see datasheet) - Peak output voltage is 1000 volts minimum, peak short circuit current is 100A minimum. A switch is provided for reversal of output polarity. Optional divider network available for oscilloscope connection.
Waveform generated is 10x1000/10x1000, V_p= 1000V. To perform the Surge 1 test, the front panel voltage meter is set to 600V and the 6 ohm tap is used. To perform the Surge 3 test, the front panel voltage meter is set to 1000V and the 10 ohm tap is used.
Two output taps are provided, one with Z_out=6 ohm and one with Z_out=10 ohm.
Enclosure is 19 x 3U, rack mountable (3U enclosure)
Outputs are isolated.

The MegaPulse 10x1000s-1

Ships with cables, graphs of theoretical and actual waveforms.

Calibration Certificate.

Options include relay outputs for PLC control.

Two 1000:1 oscilloscope BNC jacks (differential mode only).

1 year warranty

• Click here to see the Voltage Duration Waveform.
• Click here to see the Voltage Rise Waveform.
• Click here to see the Current Duration Waveform.
• Click here to see the Current Rise Waveform.

(Note: If the tests in Issue 3, Table 4-3 are to be conducted, the model 10x1000s-2 should be specified in lieu of this tester.)
This tester is configured with two outputs for testing two-wire products in accordance with Table 4-1 Test Condition A.

MegaPulse 10x1000s-1-2

Additional outputs for four-wire testing, as needed, up to four.

Options
Option RI: PLC Interface Relay Board.
Option BNCV: 1000:1 Voltage BNC output
Option P6015: High accuracy Tektronix probe for proper waveform measurement

    TOP

GR-1089, Table 4-2, Surges 2 and 5:

MegaPulse 10x360s-1 - Peak output voltage is 1000 volts minimum, peak short circuit current is 100A minimum. A switch is provided for reversal of output polarity. Optional divider network available for oscilloscope connection.
Waveform generated is 10x360/10/360, V_p= 1000V. To perform the Surge 2 test, the front panel voltage meter is set to 1000V and the 10 ohm tap is used. To perform the Surge 5 test, the front panel voltage meter is set to 1000V and the 40 ohm tap is used.
Two output taps are provided, one with Z_out=10 ohm and one with Zout=40 ohm.

Enclosure is 19 x 3U, rack mountable (3U enclosure)
Outputs are isolated.

The MegaPulse 10x360s-1

Ships with cables, graphs of theoretical and actual waveforms.

Calibration Certificate.

Options include relay outputs for PLC control.

Two 1000:1 oscilloscope BNC jacks (differential mode only).

1 year warranty

This tester is configured with two outputs for testing two-wire products in accordance with Table 4-1 Test Condition A and B.

MegaPulse 10x360s-1-2

• Additional outputs for four-wire testing, as needed, up to four. Can be expanded to 24 channels; see our MegaPulse 10x360.12Pair.

Options

Option RI: PLC Interface Relay Board.
Option BNCV: 1000:1 Voltage BNC output
Option P6015: High accuracy Tektronix probe for proper waveform measurement

    TOP

GR-1089, Table 4-2, Surge 4:

MegaPulse 2x10s-2.5 - Peak output voltage is 2500 volts minimum, peak short circuit current is 500A minimum. A switch is provided for reversal of output polarity. Optional divider network available for oscilloscope connection.
Waveform generated is 2x10/2x10, V_p= 2500V. To perform the test, the front panel voltage meter is set to 2500V and the 5 ohm tap is used.
Five output taps are provided, with Z_outt=2.5, 5, 8, 10 and 15 ohm.
Enclosure is 19 x 3U, rack mountable (3U enclosure)
Outputs are isolated.

The MegaPulse 2x10s-2.5

Ships with cables, graphs of theoretical and actual waveforms.

Calibration Certificate.

Options include relay outputs for PLC control.

Two 1000:1 oscilloscope BNC jacks (differential mode only).

1 year warranty

(Note: If tests in Issue 1 and 2, Table 4-3, and Issue 3, Table 4-4 are to be conducted as well, the MegaPulse 2x10s-5 should be substituted.)

This tester is configured with two outputs for testing two-wire products in accordance with Table 4-1 Test Condition A and B.

MegaPulse 2x10s-2.5-2

• Additional outputs for four-wire testing, as needed, up to four.

Options

Option RI: PLC Interface Relay Board.
Option BNCV: 1000:1 Voltage BNC output
Option P6015: High accuracy Tektronix probe for proper waveform measurement