MegaPulse 10x250Telco: Surge Test Equipment for GR-1089 Issue 4, MultiFunction output for 10x250 Testing of Telecommunications Ports

The 4000V/2000A 10x250/10x250 waveform is now available from Compliance West.

The MegaPulse 10x250Telco packages the 10x250 symmetrical waveform for the following Telecommunications Port tests in a single enclosure.

• Voltage 10x250uSec, Current 10x250uSec, 4000V 500A dual channel output
  • GR-1089 4th Ed Table 4.7 First-Level AC Power Fault (Telecommunications Port)
  • GR-1089 4th Ed Table 4-12 Protection Test Criteria (4000V, 500A test generator required by Section 4.7) 10 repetitions each polarity required
• Voltage 10x250uSec, Current 10x250uSec, 3000V 2000A single channel output
  • GR-1089 4th Ed Table 4.9 Second-Level AC Power Fault for Equipment Ports with Secondary Protection (Telecommunications Port)
  • GR-1089 4th Ed Table 4-20 Lightning Surges for Severe Climactic Conditions, First Surge Level. 1 repetition each polarity required.
• Voltage 10x250uSec, Current 10x250uSec, 4000V 2000A single channel output.
  • GR-1089 4th Ed Table 4-10 Second-Level AC Power Fault (Telecommunications Port)
  • GR-1089 4th Ed Table 4-23 Second-Level Lightning Surge without external protector. 1 repetition each polarity required.
  • GR-1089 4th Ed Table 4-27 Second-Level Lightning Surge with External Protector. 1 repetition each polarity required.
• Voltage 10x250uSec, Current 10x250uSec, 2000V 1000A single channel output.
• GR-1089 4th Ed Table 4-21 First-Level Lightning Surge Test, Surge Test 2. 5 repetitions each polarity required.
• GR-1089 4th Ed Table 4-25 First-Level Lightning Surge with External Protector, Surge 2. 5 repetitions each polarity required.

All outputs are in accordance with the tolerance requirements of GR-1089 4th Edition, Appendix A.

MegaPulse 10x250Telco:

An economical solution for performing the 10x250 symmetrical Lightning Protection Tests on the telecommunications port for GR-1089 4th Edition.

In its standard configuration, polarity reversal is accomplished manually, by the operator switching the output leads on the front panel of the MegaPulse 10x250Telco. To operate the tester, the operator pushes the CHARGE button, waits until the desired voltage appears on the front panel meter, and then presses TEST. This simple and economical manual tester gets the job done.

Some tests in these Tables contain repetitive requirements, so we designed this tester to optionally include TestMinder, our computer controlled multiple test manager, and also an optional automatic switchable polarity control for true automated testing. For completely automated testing, order our TELP option for automatic polarity control. Then add either option RI for PLC control; or option TMM for TestMinder computer control.

If you don't mind switching the leads yourself, but still want the tests for each polarity to proceed under computer control, just order the TestMinder option alone.

Compliance West surge testers are simple and reliable, and the guys that designed and built them are here to repair and calibrate them when the time comes. If you can't get it fixed, why buy it?

Enclosure is 24 in. wide by 22 in. deep by 29 in. tall.

Ships with cables, graphs of theoretical and actual waveforms.

Provided with Calibration Certificate to NIST by MIL-STD-45662-A.

Options include relay outputs for PLC control or computer control via TestMinder MegaPulse.

Polarity reversal manually or automatically via Option TELP. TELP required for PLC or Computer control.

1 year warranty

 

Options

Option RI: PLC Interface Relay Board.
Option TMM: TestMinder MegaPulse Computer Control
Option TELP: Automatic Polarity reversal via front panel switch and Option RI or Option TMM (if so equipped).

    TOP